Product Expertise: Pioneers of Digital Multimeters & Clamp Meters for Rail Sector

Share with your network


KUSAM-MECO has introduced a most advanced TRMS Digital Multimeter Model KM 891 having 60,000 Counts with data logging function & PC interface. It has 21 Functions & 63 Ranges. This new Digital Multimeter has 21 function packed in 1 instrument so that the user does not have to carry many instruments. The basic DC voltage accuracy is 0.03%. The instrument is water proof & dust proof with IP 65 rating. It has safety compliance CAT III 1000V & CAT IV 600V. It can capture trends and Data record / read back 20,000 records. For the safety of the instrument & the user in case of wrong test lead input, the instrument gives alarm & buzzer to warn the user. It also has date & time function. It has measuring functions AC current, AC + DC Current, AC Voltage, AC + DC Voltage, DC Current, Resistance, Capacitance, Frequency, Temperature measurement function


A very special function in the instrument is Conductance measurement. Additionally, it has the function of duty cycle, Diode Test, continuity Test and Pulse width. It has dBV and dbM. To conserve the battery power the meter will switch off, if any switch or button is not operated for 15 minutes. It can also display Maximum & Minimum & Relative value. Peak detection of the input value is also available in this instrument. It also has the function of Data Hold, Comparison instrument. It complies with Safety Standards IEC/EN 61010-1, EN6101-2-30 & pollution degree


KUSAM-MECO has introduced a new TRMS Digital Multimeter Model-KM 60-T. It is a 6000 counts Multimeter having 12 functions & 39 Ranges. It has a large backlight display. It measures TRMS AC Voltage upto 750V & AC Current upto 10Amps. It has function of DC Voltage upto 1000V & DC Current upto 10A. It can also measure frequency upto 10 MHz. The Resistance range is upto 40 M Ohms. Additionally it measures Capacitance upto 9.999 mF. It also has Diode & Continuity TEST. Other features include Non-Contact Voltage detection & pulse output. It also has data hold & MAX/MIN & Rel Zero function. For taking measurement in poorly lit or dark places, it is equipped with a flash light.


To conserve power, the instrument will be deactivated if there is no input signal for about 15 minutes. Over range is displayed by “OL”. It is light in weight (approximately 250gms including battery). It is supplied with high quality Test lead, battery & user manual. It is warranted for 01 year. It is housed in a highly insulated strong plastic case and supplied with 4 spikes, test leads, instruction manual, shoulder belt, carrying case & batteries. It is light in weight (1450 gram including batteries) and handy to carry Size 250 (L) x 190 (W) x 110(D) mm. It comes with a one year warranty.


KUSAM-MECO presents its latest offering of Fork Clampmeter with only 12mm Slim-Probe open jaws for easy slide into tight wiring. It is packed with features not available in competition. Features include 6000 counts display dual sensitivities EF-Detection, 12.5mm ACA FORK Clamp, Backlight LCD Display, fully body, Crest, Max Min, IN-RUSH Currents, (5milli seconds) innovative Beeplit Diode Test, Records Max/Min reading over time, Automatic APO disable feature, Relative Zero for convenient reading comparison, Data Hold, AC Voltage (LPF), DC Voltage, Capacitance, Resistance, Temperature (Type K-Thermocouple), DCmA for HVAC flame sensors testing, BeepLit Continuity Test. Non-Contact EF-Detection (NCV) with Hi / Lo selectable sensitivities. Direct LPF / ACV & LPF Hz for VFDS (signals upto 600V). Autoranging intelligent Auto-Power- Off, Ergonomic & Streamline HIGH



Shop no.18, 1st Floor, CIDCO Shopping Complex, Plot # 9, Sector-7, Rajiv Gandhi Marg, Sanpada, Navi Mumbai – 400705. Tel.- 022- 27754546, 27750662, 27750292 Email : | Website:

Article Source: Kusam Electrical Industries Ltd | This Product Expertise is a part of our Latest Magazine: Subscribe to our Magazine Today!

Be the first to comment

Leave a Reply

Your email address will not be published.