Sudhir Power Projects bags Electrical & Mechanical works contract for 23 stations of extensions of Delhi Metro’s Line 7 & 8

Share with your network

The Delhi Metro Rail Corporation Ltd. (DMRC) has issued Letter of Acceptance (LOA) to M/s Sudhir Power Projects Limited for the work “Design Verification, Supply, Installation, Testing and Commissioning of Electrical & Mechanical works, Fire Detection and Fire Suppression System including D.G. Sets for Elevated Corridors of “Line – 7 Ext.: Majlis Park to Maujpur (8 Stations)”, “Line – 8 Ext.: Janakpuri West to Majlis park (13 Stations)”, “Line – 8 Ext.: Majlis park – R K Ashram (2 Stations)”, “Mukundpur Depot Augmentation Work”; “Electrification of PWD flyovers Part 1 & Part 2” of Phase-IV of Delhi MRTS Projects.”

  • Tender Reference Number: DE-01 Lot 1
  • Awarded Value: INR 123.07 Crore
  • Completion period of the Work: 36 months

In October Last year, the DMRC had invited online open e-tenders for the Tender: DE-01 Lot 1

Employers Requirement:

According to the tender document, the said contract is generally for the following works of DMRC Phase-IV MRTS being executed by DMRC:

  • Supply, Installation, Testing and Commissioning of E&M, BMS, DG, Fire Detection, Fire Suppression and HVAC Systems for 23 stations mentioned in this contract.
  • Supply, Installation, Testing and Commissioning of E&M, Fire Detection, Fire Suppression and HVAC Systems for Mukundpur depot augmentation works mentioned in this contract.
  • Supply, Installation, Testing and Commissioning of Electrification works for PWD flyovers Part 1 and 2 mentioned in this contract.

Scope of work:

The scope of work under these specifications generally covers but is not limited to supply, fabrication, installation/fixing, necessary touch up painting, testing and commissioning of the items mentioned in the Bill of Quantities. The contractor shall provide all required labour and install all materials, appliances, equipment (except those items which will be supplied by the owner to the contractor at site) necessary for the complete provision and testing of the installation as specified herein and shown on the drawings.

The work shall include all incidental jobs / minor civil works connected with installation such as excavation in trenches and backfilling, cutting, drilling and grouting etc. The following jobs shall be deemed to be included in the scope of work of relevant item whether specifically mentioned or otherwise:

  • Conduiting, Wiring, Supply & Fixing of Modular type Switches etc. for Lighting & fans etc.
  • Conduiting, Wiring, Supply & Fixing of Modular type Sockets and Switches including Industrial Socket outlets wherever required and as per drawings.
  • External Lighting including its Feeder Pillar, Cabling, Poles all complete, High Mast (as applicable). 
  • Lighting Fixture for internal areas (including verification of lux level achievable in various areas) and External Areas.
  • Fire Detection and Alarm System including associated Conduiting and Wiring.
  • Safety Equipment as per requirement.
  • All panels & DBs including Main Distribution Board, Essential Power Panel, AC Power Panel, Escalator Power Panel, Passenger Amenities Panel, Fire Pump Panel, Water Pump Panel, Emergency Power Panel, Lighting Distribution Boards etc. or other wherever applicable.
  • Various Distribution Boards / Panels as required with Automatic Source Transfer System etc.
  • Power Supply for Signage.
  • DC Control Supply system as required.
  • Power Cables and Control Cables, Cable Trays, Raceways and Ducting etc.
  • Exhaust Fans, bracket fans, air circulator fans and Ceiling Fans.
  • Ventilation of Basement & Generator Room, Substation & Pump Room, Air- Conditioning of Equipment Rooms and other areas as specified as per requirement.
  • Protective Earthing and Lightning Protection.
  • Cabling, Hume Pipes, Cable Termination, RCC trenches, Poles etc. for External Lighting. 
  • Protection and Interlocks.
  • Verification of GFC Drawings.
  • Preparation of Shop Drawings and As Built drawings.
  • Submission of Scheme for total discrimination between ACBs and MCCBs.
  • Pressure calculations for fire Suppression system.
  • Protective Earthing and Lightning Protection.
  • Cabling, Hume Pipes, Cable Termination, RCC trenches, Poles etc. for External Lighting.
  • Protection and Interlocks.
  • Verification of GFC Drawings.
  • Preparation of Shop Drawings and As Built drawings.
  • Submission of Scheme for total discrimination between ACBs and MCCBs.
  • Pressure calculations for fire Suppression system.
  • Transportation, Storage, insurance etc.
  • Loading, transportation and unloading.
  • Protection of stored materials/installed work against damage due to dirt, sun and rain including providing tarpaulin/ PVC sheet covers as required.
  • Providing security arrangements/watch and ward for stored materials and installed works to guard against pilferage including providing temporary covers on conduit outlets after drawing of wires before fixing switches/fittings etc.
  • Comprehensive insurance with DMRC as beneficiaries against pilferage during transportation/storage/installation as per GCC.
  • Demobilization and clearing of all temporary works/facilities after completion of work at site and cleaning work are before handing over.

Source: DMRC-Tender update | Image Credit: DMRC

Be the first to comment

Leave a Reply

Your email address will not be published.


*